Welding electrodes and wire
ELECTRODES AND WELDING WIRE from ELECTRODE JESENICE - SLOVENIA
Elektrode Jesenice products are manufactured according to the strict needs of customers and also well-known international standards: TUV, DB, GL, BV, LR, ABS, DNV and others. The whole production process is strictly in accordance with the quality standard ISO 9001
ELECTRODES - Ф 2, 2.5, 3.25, 4, 5
Types of electrodes by purpose:
basic - EVB50
rutile - EMONA
for cast iron - CAST NiFe
for copper and copper alloys
for stainless steels
for aluminum and aluminum alloys
Rolls wire MIG / MAG - (Metal inert gas) Steel wire for the production of metal structures, vessels and boilers. The welded seam has very good mechanical properties. The wire is precisely wound in layers. Quality copper plating provides better current contact and longer operating time of nozzles, cores and wire feed rollers
- MIG 65 Ni and Mo alloyed metal inert welding wire is suitable for welding fine-grained microalloyed steels.
- MIG 75 Mn, Ni and Mo alloyed metal inert gas, is suitable for welding fine-grained steels with high tensile strength.
- and other
TIG / TIG wire rods (Tungsten Inert Gas) - TIG wire rods for welding with tungsten electrodes and shielding gas argon (Ar) in the manufacture of boilers, vessels and other metal structures
- VAC 60 TIG VAC 60 with hard copper coating for welding in gas protective atmospheres. Suitable for welding non-alloy steels with a tensile strength directly below 530 N / mm2 such as boiler plate, fine-grained steels, tubular steels, shipbuilding steels and castings.
- VAC 65 TIG VAC 65 with hard copper coating for welding in a gas-protected atmosphere. Slightly higher silicon and manganese alloy values than VAC 60. Higher silicon and manganese content increase the tensile stress and tensile strength of the weld metal (compared to VAC 60). The high silicon content promotes low sensitivity to surface impurities and contributes to smooth welding. Suitable for welding non-alloy and low-alloy construction steels with a tensile strength directly below 640 N / mm2 such as boiler plate, fine-grained steels, steel pipes, shipbuilding steels and castings.
Elektrode Jesenice products are manufactured according to the strict needs of customers and also well-known international standards: TUV, DB, GL, BV, LR, ABS, DNV and others. The whole production process is strictly in accordance with the quality standard ISO 9001
ELECTRODES - Ф 2, 2.5, 3.25, 4, 5
Types of electrodes by purpose:
basic - EVB50
rutile - EMONA
for cast iron - CAST NiFe
for copper and copper alloys
for stainless steels
for aluminum and aluminum alloys
Rolls wire MIG / MAG - (Metal inert gas) Steel wire for the production of metal structures, vessels and boilers. The welded seam has very good mechanical properties. The wire is precisely wound in layers. Quality copper plating provides better current contact and longer operating time of nozzles, cores and wire feed rollers
- MIG 65 Ni and Mo alloyed metal inert welding wire is suitable for welding fine-grained microalloyed steels.
- MIG 75 Mn, Ni and Mo alloyed metal inert gas, is suitable for welding fine-grained steels with high tensile strength.
- and other
TIG / TIG wire rods (Tungsten Inert Gas) - TIG wire rods for welding with tungsten electrodes and shielding gas argon (Ar) in the manufacture of boilers, vessels and other metal structures
- VAC 60 TIG VAC 60 with hard copper coating for welding in gas protective atmospheres. Suitable for welding non-alloy steels with a tensile strength directly below 530 N / mm2 such as boiler plate, fine-grained steels, tubular steels, shipbuilding steels and castings.
- VAC 65 TIG VAC 65 with hard copper coating for welding in a gas-protected atmosphere. Slightly higher silicon and manganese alloy values than VAC 60. Higher silicon and manganese content increase the tensile stress and tensile strength of the weld metal (compared to VAC 60). The high silicon content promotes low sensitivity to surface impurities and contributes to smooth welding. Suitable for welding non-alloy and low-alloy construction steels with a tensile strength directly below 640 N / mm2 such as boiler plate, fine-grained steels, steel pipes, shipbuilding steels and castings.
Böhler Welding Austria - ELECTRODES AND WELDING WIRE
Today, Böhler Welding, which has merged the brands of Böhler, T-PUT, Avesta and UTP into the global Föst Alpine brand network, Böhler Welding, has been known for over 85 years as an innovative manufacturer of welding consumables together. welding in all major electric arc welding processes.
Types of electrodes by purpose:
1. Basic - Electrodes for welding seams with the highest strength requirements. The weld metal is tough and has high impact strength even at negative temperatures (down to -50 ° C). They are designed for the production of structures with high loads and supervisory equipment - Böhler AWS E7018-1, Böhler FOX EV 50, Böhler FOX EV 63
2.Rutile - Electrodes for professional and hobby welding of building structures, vessels and pipes, with alternating or direct current - Böhler FOX ETI, Böhler AWS E6013, Böhler FOX SPE
3. For cast iron, copper and copper alloys, for stainless steels, for aluminum and aluminum alloys
Roll wire MIG / MAG (Metal inert gas) - Steel wire for the production of metal structures, vessels and boilers. The welded seam has very good mechanical properties. The wire is precisely wound in layers. Quality copper plating provides better current contact and longer operating time of the nozzles, cores and wire feed rollers - Böhler SG2 and others.
TIG / TIG wire rods (Tungsten Inert Gas) - TIG wire rods for welding with tungsten electrodes and shielding gas argon (Ar) in the manufacture of boilers, vessels and other metal structures - Böhler EMK 6 and others.
Today, Böhler Welding, which has merged the brands of Böhler, T-PUT, Avesta and UTP into the global Föst Alpine brand network, Böhler Welding, has been known for over 85 years as an innovative manufacturer of welding consumables together. welding in all major electric arc welding processes.
Types of electrodes by purpose:
1. Basic - Electrodes for welding seams with the highest strength requirements. The weld metal is tough and has high impact strength even at negative temperatures (down to -50 ° C). They are designed for the production of structures with high loads and supervisory equipment - Böhler AWS E7018-1, Böhler FOX EV 50, Böhler FOX EV 63
2.Rutile - Electrodes for professional and hobby welding of building structures, vessels and pipes, with alternating or direct current - Böhler FOX ETI, Böhler AWS E6013, Böhler FOX SPE
3. For cast iron, copper and copper alloys, for stainless steels, for aluminum and aluminum alloys
Roll wire MIG / MAG (Metal inert gas) - Steel wire for the production of metal structures, vessels and boilers. The welded seam has very good mechanical properties. The wire is precisely wound in layers. Quality copper plating provides better current contact and longer operating time of the nozzles, cores and wire feed rollers - Böhler SG2 and others.
TIG / TIG wire rods (Tungsten Inert Gas) - TIG wire rods for welding with tungsten electrodes and shielding gas argon (Ar) in the manufacture of boilers, vessels and other metal structures - Böhler EMK 6 and others.